# $Header: /a/cvs/386BSD/ports/flexfax/etc/config.ppi-pm14400fxmt,v 1.1 1993/08/31 23:41:24 ljo Exp $
#
# Config file for a Practical Peripherals PM14400FXMT
# Class 2 modem w/ firmware revision 2.17 or newer.
#
# CONFIG: CLASS2: *PM14400FXMT*
#
CountryCode:		1		# USA
LongDistancePrefix:	1
InternationalPrefix:	011
AreaCode:		415
DialStringRules:	etc/dialrules
FAXNumber:		+1.415.965.7824
ServerTracing:		1		# log server-related operations
SessionTracing:		11		# log server-related operations
RecvFileMode:		0664		# recvd facsimile are not public
#QualifyTSI:		etc/tsi		# accept facsimile from anyone
SpeakerVolume:		off		# machine's are already too loud
RingsBeforeAnswer:	1		# answer on first ring
#
ModemType:		Class2
ModemMaxRate:		19200		# max rate for DCE-DTE communication
ModemRecvRate:		19200		# fax recv is locked at 19.2
ModemXONXOFF:		yes		# XON/XOFF flow control assumed
ModemFlowControlCmd:	&K2		# set desired flow control method
ModemSetupDTRCmd:	&D3		# setup so DTR drop resets modem
ModemSetupDCDCmd:	&C1		# setup so DCD reflects carrier (or not)
#GettyArgs:		"std.%s -"	# locked at receive rata (for SunOS)
#GettyArgs:		"-h %l dx_%s"	# requires modem to auto-detect fax/data
#
ModemDialCmd:		DT%s		# T for tone dialing
#
ModemSendFillOrder:	LSB2MSB		# as expected
ModemRecvFillOrder:	MSB2LSB		# opposite of what makes sense
#
# Configuration parameters for Class 2 modems.
#
Class2BORCmd:		BOR=2		# bit order for phase B/C/D (direct)
Class2RecvDataTrigger:	"\022"		# character sent to modem to start recv